Swimming Pool Ideas - Fixing Common Problems In Automatic Pool Cleaners

Fixing Common Problems In Automatic Pool Cleaners - Suction side and pressure side automatic pool cleaners are still the most affordable type of pool cleaners out there. They function off of the power that they get from the pool's pump, by water either being pumped to them or sucked through them. While it is a simple system, with the suction side automatic pool cleaners being the most simple, problems can arise from time to time and most of them have a simple solution.
Loss of Function
Most commonly, the source of this problem is a lack of water either going to or coming form the unit. The first place to check is the pump strainer basket and the pools filter, to see if either one or both of these are clogged up. If they aren't, then the next place to check is the line itself and most notably at any couplings where debris will tend to clog. If nothing is there, then the next place to look is in the unit itself. If nothing is there, then it may turn out that your hose may have a hole or a crack in it.
Not Covering the Whole Pool
This is another common problem that is most usually caused by the hose running to the unit being too short. However; if this is not your case, particularly with a suction side automatic pool cleaner, the next thing to check is the amount of water going in and coming out of the pools water ports. Your suction side automatic pool cleaner a be following a current in the water that is created by these water ports in your pool. By simply adjusting the amount of water that is coming in and going out of each port, this current can be eliminated and your problem solved.

Others Online video on Fixing Common Problems In Automatic Pool Cleaners

Swimming Pool Service - Fort Lauderdale FL - 954-475-1400 / Weekly Maintenance Cleaning Repair

---

Last Search : swimming pool sweepers, swimming pool lyrics the submarines, inground pool cleaner pressure side, pool cleaner manufacturer, swimming pool clipartSwimming Pool Cleaners